New Technique to Hack WiFi passwords | Using Kali Linux 2020
Tools need to be downloaded:
- Hcxdumptool
- Hcxpcaptool
- Hashcat
Steps:-
1; Request PMKID from the router
Unlike older techniques where you had to wait until a user connected to
the access point so that you can capture the 4-way handshake that is of
EAPOL.This new method for finding out the password credentials does not
require that anymore. The attack works on the RSN-IE or Robust Security
Network Information Element. It only uses one frame which it requests
from the wireless router.
2; Install Hcxdumptool & Hcxpcaptool
2; Install Hcxdumptool & Hcxpcaptool
This is a tool that will help you to capture the PMKID packet from the
access point. After capturing the frame, it can also dump it into a file
for you. Below are some features of Hcxdumptool:
Can easily capture identities and usernames from a WLAN.Can easily capture passwords, plain master keys, handshakes and PMKIDs from traffic on WLAN.
After installing this tool run the below command in the CLI.
$ ./hcxdumptool -o test.pcapng -i wlp39s0f3u4u5 –enable_status
The command displayed above will dump the frame to a file.
3; After doing the above step now you will need to extract some contents from the frame file.
Hashcat is a tool used a lot in the security and penetration testing field. It is used by both hackers and researchers for finding out passwords by cracking their hash. After finding out the hash of the password you can enter the password in hashcat and it will find it out for you. It will take some time depending on how complex the password is of the wireless network. Enter the cmd below and run hashcat.
$ ./hashcat -m 16800 test.16800 -a 3 -w 3 ‘?l?l?l?l?l?lt!’
You need some brain, basic knowledge and patience
Can easily capture identities and usernames from a WLAN.Can easily capture passwords, plain master keys, handshakes and PMKIDs from traffic on WLAN.
After installing this tool run the below command in the CLI.
$ ./hcxdumptool -o test.pcapng -i wlp39s0f3u4u5 –enable_status
The command displayed above will dump the frame to a file.
3; After doing the above step now you will need to extract some contents from the frame file.
This will be in the pcapng format. You can easily convert this into a
hash format which the popular program ‘Hashcat‘ can accept. Use the
below command to extract the pcapng file.
$ ./hcxpcaptool -z test.16800 test.pcapng
4; Using Hashcat to Crack the Wifi Password (WPA PSK Pre-Shared Key Recovery)
$ ./hcxpcaptool -z test.16800 test.pcapng
4; Using Hashcat to Crack the Wifi Password (WPA PSK Pre-Shared Key Recovery)
Hashcat is a tool used a lot in the security and penetration testing field. It is used by both hackers and researchers for finding out passwords by cracking their hash. After finding out the hash of the password you can enter the password in hashcat and it will find it out for you. It will take some time depending on how complex the password is of the wireless network. Enter the cmd below and run hashcat.
$ ./hashcat -m 16800 test.16800 -a 3 -w 3 ‘?l?l?l?l?l?lt!’
You need some brain, basic knowledge and patience
Posts
No comments: